DDA Handrail / Ramp Handrail. End section for DDA compliant handrails. Straight length is nominal 1700mm long, turn down is nominal 250mm. Rail is 42.4mm dia - Galvanised.

3.2mtr length galvanised steel handrail tube 42.4mm diameter (Tubing may have a blue marking on it. The blue marking is a quality system imposed by quality standards. It is applied at the point of manufacture and is totally out of our control. It is a water based paint which is easily removed using wire wool if required.) ***Click Here for Brochure Download***     Please Note - Lockinex Tube is to EN10255:2004 - Galvanised to EN 10240:A1 - Grade S195T

42.4mm swivel elbow key clamp. Adjusts to angles between 85-180 degrees. Used to change direction of rails.

42.4mm tube plug key clamp handrail fitting (kee pipe klamp tube Q fittings). Robust grey plastic insert to suit 42.4mm dia tube (Code size 7) with max wall thickness 4mm.

Armco Barrier Handrail Ball Post. Fixes in web of pre-holed 610 & 760mm tall RSJ & C Section bolt down posts to create a handrail at 1100mm finish height. Can also be fixed onto posts of other heights, but holes must be drilled in the post webbing on site to suit finish height requirements. Order 42.4mm dia tube to create handrail.

90 degree handrail corner joint. Used to create a flush 90 degree corner on a length of handrail. Product has a galvanised finish.