Access Ladder / Assembly Bolt.
M12 x 35mm Long. Used for assembling all ladder components, EXCEPT the top Step.
Use 50mm Long bolts for the TOP Step assembly.
Dome Head Bolt, Nut & Washer - BZP.
£0.56
Access Ladder / Assembly Bolt.
M12 x 35mm Long. Used for assembling all ladder components, EXCEPT the top Step.
Use 50mm Long bolts for the TOP Step assembly.
Dome Head Bolt, Nut & Washer - BZP.
Access Ladder / Assembly Bolt.
These 50mm Long bolts are for the Top Step
insertion. (Four Required for each top step assembly.)
M12 x 50mm Long.
Dome Head Bolt, Nut & Washer-BZP.
£0.62
Access Ladder / Assembly Bolt.
These 50mm Long bolts are for the Top Step
insertion. (Four Required for each top step assembly.)
M12 x 50mm Long.
Dome Head Bolt, Nut & Washer-BZP.
Used with the DDA-03 and the DDA-04.
Best used with a cordless drill on a medium speed.
The screw drills through and threads the metal creating a strong joint between the components.
£0.18
Used with the DDA-03 and the DDA-04.
Best used with a cordless drill on a medium speed.
The screw drills through and threads the metal creating a strong joint between the components.
M16 x 50mm hot dip galvanised, grade 8.8 bolt , nut and 2 washers.
(1 is required for joining the armco barrier to the armco posts)
(Also suitable for use with our ball type posts for bolting to steel work).
£0.62
M16 x 50mm hot dip galvanised, grade 8.8 bolt , nut and 2 washers.
(1 is required for joining the armco barrier to the armco posts)
(Also suitable for use with our ball type posts for bolting to steel work).
Tarmac Fixing / Rubber Tarmac Fixing Sleeve.
Tarmac Fixing-M12 x 100mm bolt and washer complete with rubber sleeve.
Tarmac Fixing. A hole must be drilled in the tarmac to accept rubber sleeve.
Drill a hole 24mm dia. and to a depth of 80mm.
This fixing can be used with Lockinex speed humps, key clamp base plates, plastic bendy bollards and column guards.
£2.56
Tarmac Fixing / Rubber Tarmac Fixing Sleeve.
Tarmac Fixing-M12 x 100mm bolt and washer complete with rubber sleeve.
Tarmac Fixing. A hole must be drilled in the tarmac to accept rubber sleeve.
Drill a hole 24mm dia. and to a depth of 80mm.
This fixing can be used with Lockinex speed humps, key clamp base plates, plastic bendy bollards and column guards.