48.3mm mesh infill panel clip. Clip to retain our mesh panels within a guardrail frame to suit 48.3mm dia tube (Code size 8) Galvanised

48.3mm mesh infill panel clip. Clip to retain our mesh panels within a guardrail frame to suit 48.3mm dia tube. Galvanised

Floor mounted mesh infill panel clip. A73 - Floor mounted bracket to retain mesh panels.

Handrail mesh infill panel. 50x50x3mm mesh. Hot dip galv. finish with 8mm rod frame. Intended for use where two horizontal rails are present (as shown in picture) to give a handrail finish height of approx. 1100mm minimum. Designed to be used with 48.3mm diameter Lockinex key clamp and/or ball standard handrail system with 1495mm upright post centres to achieve general duty loading. Use Lockinex A70-8, A72-8 & A73 mesh panel clips where required.

Handrail mesh infill panel. 50x50x3mm mesh. Hot dip galv. finish with 8mm rod frame. Intended for use where two horizontal rails are present (one at top & one at bottom as shown in picture). Gives a handrail finish height of approx. 1100mm minimum. Designed to be used with 48.3mm diameter Lockinex key clamp and/or ball standard handrail system with 1495mm upright post centres to achieve general duty loading. Use Lockinex A70-8 & A72-8 mesh panel clips where required.

Handrail mesh infill panel. 50x50x3mm mesh. Hot dip galv. finish with 8mm rod frame. Intended for use where only one horizontal rail is present (as shown in picture) to give a handrail finish height of approx. 1100mm minimum. Designed to be used with 48.3mm diameter Lockinex key clamp and/or ball standard handrail system with 1495mm upright post centres to achieve general duty loading. Use Lockinex A70-8, A72-8 & A73 mesh panel clips where required.