Galvanised Self Closing Safety Gate, Incorporating the industry leading GS-02 Enclosed Gate Spring set. 1.0mtr wide full height gate with welded integral toeboard + 2 no. 42.4mm dia posts. (Posts are 1500m long) These can be concreted in or cut down to the required size and fixed with a choice of Lockinex Key Clamp Base Plates. (Please see the Key Clamp-Steel range) Mesh panel kit also available from the options list below.

Galvanised Self Closing Safety Gate, Incorporating the industry leading GS-02 Enclosed Gate Spring set. 1.0mtr wide full height gate with welded integral toeboard + 2 no. 48.3mm dia posts. (Posts are 1500m long) These can be concreted in or cut down to the required size and fixed with a choice of Lockinex Key Clamp Base Plates. (Please see the Key Clamp-Steel range) Mesh panel kit also available from the options list below.

This gate can be used with our access ladder system or secured to 42.4/48.3mm tubular key clamp uprights using the U bolts supplied with the kit. It can be utilised as a safety gate for other purposes too. This gate is self-closing. Gate functions through 180 degree. Tensioning spring in either a clockwise or anti-clockwise direction to swing gate either way, it can be hung left or right handed. Gate frame may be easily cut down to suit required opening. Supplied in kit form ready for quick assembly. Compliant with BS EN ISO 14122-3.

This gate can be used with our access ladder system or secured to 42.4/48.3mm tubular key clamp uprights using the U bolts supplied with the kit. It can be utilised as a safety gate for other purposes too. This gate is self-closing. Gate functions through 180 degree. Tensioning spring in either a clockwise or anti-clockwise direction to swing gate either way, it can be hung left or right handed. Gate frame may be easily cut down to suit required opening. Supplied in kit form ready for quick assembly. Compliant with BS EN ISO 14122-3.

Gate Spring / Safety Gate. Industry leading design. Gate Spring assembly, for the engineer to use as required. Stainless steel spring in a galvanised housing. Tensioned by adjusting the bolt head. Top lugs and lower lug/hinge assembly in "Raw" Steel ready for welding to tubular or flat profiles (product code GS02 for tube or GS01 for flat). Once welded in position, offer up the housing and locate in postion with machine screws. Tension spring in clockwise or anti-clockwise direction to swing gate in either direction. Can be left handed or right handed. Note! Bolt requires ONLY half turn to tension spring-Do not over tighten bolt as damage to spring wil occur.

Gate Latch Kit. This kit includes the striking pin and gate latch as shown in main image. If fitting to a tubular key clamp/rail system, order GL36 & A36 mounting brackets separately to suit tube diameter.